In this article, I’ll give you four basic tips on how to design and build a garage. Building a garage is a challenging task, but you can do it if you take it step by step.
1. Check Building Codes and Obtain Permits
As with any major project, the first thing you want to do is to check the local building codes in your area and obtain any required permits before you begin construction. Usually you’ll need to document a set of garage plans as well as a plan that indicates the location of the garage on your land. Your local municipality will tell you exactly what you need.
2. Measure Out the Garage Site
Measure out the area on which you plan on building your garage. Make sure that you have enough area to support the design indicated on your set of garage plans. Plan on allowing at least 20 feet in length from back to front and 11 feet 6 inches in width for a single-car garage. Allow at least 18 feet 3 inches for a 2-car garage. Allow for even more length if you plan on adding extra space for storage or a work area.
3. Choose Design and Garage Door Torsion Spring Cable Drum Functionality
Plan in advance all of the elements and functionality you desire for your garage. Think about what you want to use it for now, and what you might want to use it for in the future. Err to the side of allowing for more storage space than you think you need, and consider the advantages of a 2-car garage if you have enough space to build one. There are plans and designs for any type of garage you may want to build, so choose one that matches or compliments your house in order to boost your property value.
4. Estimate How To Board Up Garage Door Costs
A detailed set of plans should give you a complete material list, which will help you to estimate material costs. Then you’ll need to secure estimates from subcontractors for any work you plan on subbing out, such as foundation pouring, electrical, plumbing, and garage door installation. If you’re planning to hire a contractor to do most or all of the work, use your set of plans to establish the material cost up front and consider supplying the materials on your own in order to avoid any extraneous surcharges from your contractor.
