If you are thinking of replacing your garage door with the new one, just follow the following tips. You can replace it by yourself as it is not a difficult task. Besides, by doing it yourself, you can save your money.
First thing you have to do is to measure the size of the old garage door before purchasing the new one. If you build a garage door for the first time, make sure that you do precise measurement as it needs more carefulness than measuring the existing door. We suggest that you exceed the size, just in case you get the wrong measurement. We recommend that you add an inch on the bottom of the door and some inches on each side.
Now it is time to determine the material and color of the door you want to install. Make sure that you prepare the tools before you start installing. This will make your task Garage Door Spring Winding Direction easier since you will not bother to look for a tool when everything is prepared. You will need saw, wood glue, lumber, plywood, screws, garage door hangers, and washers.
If the tools are all prepared, then you need to build the framing based on the size. Also, think about the panels, on how they will be cut. If you have done with that, now you can start creating the grooves for the determined panels. You can apply the wood glue you have prepared on the edges. Put this step into practice before you slide the panels into the grooves you have created.
Now you have to consider some mechanisms to operate the garage door so that you can open and close it easily. You can get in any home store around your residence. Colonial House Garage Doors Or, you might try online shopping to get them. You yourself can install an opener and closer just by following the instructions inserted within the box.
